Showev Tesla Model Y/3 Matte Screen Protector Anti Glare Fingerprint 15 Center Control Touchscreen N
ShowEv Tesla Model Y/3 Matte Screen Protector Anti Glare Fingerprint 15 Center Control Touchscreen Navigation Touch Tempered Glass Screen Protector
- Make sure this fits by entering your model number.
- Easy installation–Cleaning kit & installation frame make putting it on your Tesla Model 3/Y screen a breeze.
- Maximum compatible for Tesla Model 3 and Model Y screen.(Note:Installing the screen cover will not affect the color,icon size and touch screen capabilities of your GPS display.)
- Touchscreen-based controls have become the new norm.Highly reflective screen surfaces while driving can be dangerous.Avoid this problem quickly and effectively with our simple solution.
- The 9H hardness will protect your display from scratches,dings,and other external damage to avoid a costly repair.It is sticks together even if severely broken.
- Anti-Fingerprint & Anti-Glare-The matte screen protector for Tesla Model 3/Y have an oleophobic coating,repels oil left from your fingerprints and adds smoothness to the screen.
WHY CHOOSE MATTE SCREEN PROTECTOR FOR YOUR TESLA MODEL 3/Y?1.Installation frame and physical electrostatic principle(the navigation screen can automatic adsorption) make putting it on your Tesla Model 3/Y screen a breeze.2.On bright and sunny days,it can maintaining your interior’s sleek design,then you can drive more safe and comfortable.3.Reducing smudges and fingerprints.Once it’s applied, you can forget it’s even there.4.The thickness is 0.33MM,which is more comfortable to use.(If it's 0.2mm,it's thin and fragile.If it's 0.4CM, it's seriously awkward. 0.33mm is just right.)5.Not need screen visor anymore.Application Steps:>>Make sure the A/C or air is switched off and no dust inside or on the screen.>>Use the provided alcohol wet wipes to clean the screen.>>Using the dust remover sticker,touch up each part of the screen and make sure no dust rests on the screen.>>Attach installation frame.(Pls make sure the orientation,and you will find directions we made on it.)>>Verify the screen protector orientation:Straight edge top side and curved edge bottom side,Red release label (left top side) close to the screen.>>Hold the screen protector on to the screen,Take off part of (around 1/3rd) the red release label from the top.>>Hold the released part to the screen and remove the remaining part of the release label.>>Once the release label is removed totally, the screen protector will attach to the screen.Then take off the installation frame.Give a push from top to bottom.
Brand : ShowEv
Category : Electronics,GPS, Finders & Accessories,GPS System Accessories,Screen Protector Foils
Rating : 4.3
ListPrice : US $26.99
Price : US $24.99
Review Count : 1250
Item Weight : 1.08 pounds
Best Sellers Rank : #15 in GPS Screen Protector Foils
SalesRank : 15
ChildASIN : B0BJ1BQPZH,B07YBSR6C4,B0BG88XJ58
Package Dimensions : 15.47 x 9.92 x 0.94 inches
Package Dimensions : 15.47 x 9.92 x 0.94 inches
Manufacturer Part Number : 20211028
Special Features : Anti Glare, Installation Frame Include
Model : For Model 3/Y
ShowEv Tesla Model Y/3 Matte Screen Protector Anti Glare Fingerprint 15 Center Control Touchscreen Navigation Touch Tempered Glass Screen Protector
- My cars screen looks exponentially better than all other teslas I have been in because of this anti glare. Makes the screen look a lot cleaner and crisper. Only complaint would be the rectangle thing used to instal it won’t install it too accurately as I tried on my car and 4 other friend’s cars and we all had to take it off and reinstall it. Another huge plus with this one is that it didn’t get ruined after retrying installation s few times. Bubbles left on the screen at first fade out in a day or two.
- I bought this screen protector for my Tesla Y. I watched a video twice through before trying to install it.The label was not in the left upper corner as instructions implied (& was shown on the schematic), but the right lower corner. Still, the curves of the screen and protector were subtle but noticeable enough for proper placement.I peeled back about a third of the film, as suggested, but even with the plastic positioning frame in place, there were multiple air bubbles that were hard to remove, and there was no screen protector installation card included in the package. Fortunately, I had one at home from a previous phone screen protector installation that worked with significant effort.
- So the item itself is great idea, good storage actually can put a 13 Pro all the way in and not hang out like other storages.A complete pain to put on though, need two people, not sure if the molding was not done correctly or what but it got on after a couple mins not super easy but not bad. Had a small scratch on the passenger side of the plastic, still figuring out if I should keep it but at the $25 price point it’s not bad, basically exactly what you’d pay over seas but with quick shipping.Somewhat wish the topfit logo wasn’t on there, rather it have said Tesla or have or have a logo… But like mentioned there is nothing else on the market like this and it really provides a lot of storage just somewhat covers your phone, still easily can put your phone and not worry about it
- The screen protector is what is says it is but the plastic guide has a little to be desired. I cleaned the screen, lined it up and stuck it down. No bubbles and laid down nicely the first time. However the flexible plastic guide is very flimsy and the alignment was off. This sent my OCD into overdrive and I developed a nervous tic and had the sudden urge to have a bowel moment. I used a fingernail to lift a corner, realign and set down. This is when a rogue piece of lint decided to make its move and strike. The damage was was done, now there was a small lint induced air bubble in the right upper quadrant of the screen. Well you know that will never do with my OCD. After a couple of attempts to correct, the screen protector ended up in the trash with the useless guide. Back on amazon for one of the ones with a rigid clear plastic guide. Well played Mr Lint, well played.
- I was a little confused with the direction and I ended up putting it on upside down. Don\'t be like me. But it was an easy fix and looks great. No glare at all.
- Easy to install but I wish they had provided better cleaning cloth. I like the feel of the material and doesn\'t have any effect on touch so thats a big positive. Its definitely not anti glare as advertised for sure. It\'s definitely miss leading.
- Good screen protector
- Works well
Post a Comment for "Showev Tesla Model Y/3 Matte Screen Protector Anti Glare Fingerprint 15 Center Control Touchscreen N"