Gps Car Mount Cup Holder With Adjustable Arm For Garmin - Replacement Gps Cupholder Ball Mount For G
GPS Car Mount Cup Holder with Adjustable Arm for Garmin - Replacement GPS Cupholder Ball Mount for Garmin Nuvi Dezl Drive Drivesmart Zumo Driveassist DriveLuxe StreetPilot RV Portable Navigator
- Sturdy 8-inch adjustable arm make your gps close to you for your perfect view and easy operation. Flexible ballhead joint construction allows you to adjust the gps in 360 degrees.
- Tool-Free Installation: Expandable base fits most Car, SUV, trucks and other vehicles with standard size round cup holders.
- An alternative to gps cd slot mount holder, gps air vent mount holder, gps friction beanbag mount holder, gps suction cup mount, gps dashboard mount, gps windshield mount and gps dash pad.
- for Garmin Nuvi 1100 1200 1250 1260 1300 1350 1370 1390 1450 1490 1690 (LM LMT T), 2200 2250 2300 2350 2360 2370 2450 2455 2457 2460 2475 2495 2497 2539 2555 2557 2558 2559 2577 2589 2595 2597 2598 2599 2639 2689 2699 (LM LMT LT), 3450 3490 3550 3590 3597 3750 3760 3790 5000 (LM LMT), 30 40 42 44 50 51 52 54 55 56 57 58 60 61 65 67 68 (LM LMT), 200 205 250 255 260 265 270 275 285 295 350 360 370 465 500 550 600 610 650 660 670 680 750 755 760 765 770 775 780 785 850 855 880 885 (W WT T LMT),etc
- Compatible with Garmin Dezl 550 560 570 580 660 680 760 770 780 785 790(LM LMT LMT-S LMTHD), Drivesmart 50 51 60 61 70 71(LMT NA LMT-S LMTHD), Zumo 220 340 345 350 390 395 396 450 550 590 595 660 665 (LM LMT-S), Driveassist 50 51 60 61 (LMT LMT-S LMT-D LMTHD NA), Drive 40 50 51 52 55 60 61(LM LMT LMT-S), RV 660 760 770 (LMT LMT-S), DriveLuxe 50 51 61, StreetPilot Aera DriveRrack series GPS Navigator
- Important Note: Mounting bracket cradle is not included. Only works for Garmin GPS units with 17mm swivel ball mounting pattern
- NOT compatible with Drivesamrt 86, Dezl OTR800 OTR810 OTR1000 OTR1010, RV 890 1090, Overlander, aera 660 760. Not work for gps units that has a camera.
Previous page 1Zero was founded in 2017, a brand focusing on Phone Automobile Cradles. We are committed to designing & producing functional and stylish products for customers.Till now, our products bring convenience to more than 5 million customers in 15 countries. The annual sales volume reaches 10,000,000+.Helping customers to enjoy the ultimate tech is our eternal pursuit.Providing High-quality products and premium service is our unchanging belief. Recommended Quality Car Mount Visit the Store Recommended GPS Car Mount Visit the Store Cell Phone Car Mount Holder Visit the Store Next page
Brand : 1Zero
Category : Electronics,GPS, Finders & Accessories,GPS System Accessories,Vehicle Mounts
Rating : 4.2
Price : US $19.99
Review Count : 2200
Item Weight : 7.2 ounces
Best Sellers Rank : #36 in GPS Vehicle Mounts
Special features : Portable,Adjustable,Expandable
Color : Black
SalesRank : 36
Package Dimensions : 7.64 x 3.62 x 3.23 inches
Package Dimensions : 7.64 x 3.62 x 3.23 inches
GPS Car Mount Cup Holder with Adjustable Arm for Garmin - Replacement GPS Cupholder Ball Mount for Garmin Nuvi Dezl Drive Drivesmart Zumo Driveassist DriveLuxe StreetPilot RV Portable Navigator
- It works great. It’s stable is firmly attached. The only problem that I have is that I don’t want to look away from the road to see my map. I would rather have my GPS higher up to eye level.
- Fit my cupholder well. Top adjustment tends to loosen with jouncing of the car, but overall works well. Much better than gluing a base to my new car, or having the suction let go of other models.
- Sturdy and stable as installed in my 2008 Scion xB. Easy to adjust to my liking.
- The height is fabulous. The problem is even when it is adjusted it shakes a bit while driving. It doesn\'t lock into place and not move. It tries to tip. I had to stuff in rags to keep it from moving while driving,It is possible that the cup holder I have was a size that was difficult to navigate, however according to the instructions it should fit and not be top heavy, which was the problem.
- This cup mount holder purchase was an attempt to get a 7\" Garmin GPS off the dashboard.First the bad: Yes, I could give this a one-star review because it won\'t work for my Chevvy Silverado application, but that is not a fair assessment of the product. The Siverado cup holders measure a full 3.5\". The 4 mount pads on the GPS cup mount are approximately 2.75\". When twisting the locking mechanism, there is very minimal movement. Even with a soda can foam insulator, the mount was too loose. There is a rectangular recess in the dash that the devise would fit into, but there was not enough adjustment to secure it.Now the good: This is a well made cup holder device for a GPS if your cup holders are 2.75\". The finish is good as are the articulating adjustments. To describe the dimensions, the device twist locking mechanism extends from the cup holder 1\", the arm is 5.5\" center to center on the hinge pins, and the arm portion with the ball is 2\". So in the vertical position, it is 8.5\" from the top of the console cup holder to the center of the ball. For my application and had I been able to secure the arm, the main beam could have been 11\". Others have also alluded that the arm could be longer. One other note: the two arms will articulate, but not swivel. Loosening the cup mount and twisting it is the only means of swiveling.I trust this will help those of you that can use this. Currently we have the flexible dash pad that works. It is a carry-over from the smaller Garmin. Still looking to get it off the dash. No CD player, so that mount is out, AC vent mounts are marginal, and the dash is not smooth enough for a suction mount. Windshield suction mount obstructs the windshield. Trying to stay in the good graces of the people that keep us safe.
- It works as described but...Made from a light weight plastic which appears to be not so sturdy so you must be careful when adjusting it or you will break it.It does fit the cup holders in my 2017 Subaru Outback but with the fitment extensed to its fullest capacity and its a sturdy fit so far.However, it may come loose in a panic stop or in the event of a collision.The height was a worry for me as it sits below the stereo and A/C controls but it actually works. It has no issues picking up the satellite and keeping track of your location with my Garmin Nuvies - I have two a BIG one (7 inches) and a small one at 3 inches.Hinges are made of plastic as are the tension adjusting knobs so care must be taken when adjusting and tightening them or you will break it as noted earlier.I would like to see this design made from light weight aluminum or something of that nature but then the cost would go way up.
- For the most part, this cup mount does a nice job and is much more reliable than the suction cup mount. The only challenge I have is that it’s hard to turn the adjustment ring to expand the sides to fit the cup holder when the mount is sitting down in the cup holder. You have to get it adjusted just right before putting it in and pushing it down into the cup holder.
- The sloped dashboard on my Corvette will not allow me to use a beanbag mount, and I have had terrible experiences with suction cup-based mounts. While the base of this is a little large for my cup holders, I was able to make it work.
Post a Comment for "Gps Car Mount Cup Holder With Adjustable Arm For Garmin - Replacement Gps Cupholder Ball Mount For G"